Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature.

Features

• Authentication to prevent forgery
  
• Jamming detection and communication channels encryption
  
• Tampering alarm
  
• Registers smoke and sharp jumps in temperature in the room
  
• Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
  
• Independently tests the smoke chamber and gives prompt notification of the need to dust
  

Principle of operation

The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room.
It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Technical data

Type of detector: Wireless
Installation method: Indoors
Compatibility: Operates with all Ajax hubs, range extenders, ocBridge Plus, uartBridge
Sensing element: Photoelectric and temperature sensors
Activation threshold: +59°С ±2°С
Type of notification: Sound/light
Volume of built-in siren: 85 dB
Alarm signal delivery time: 0.15 s
False alarm filter: Yes
Interconnected alarms: Yes
Power supply: two CR2 batteries, 3 V
Backup battery: CR2032
Battery life: up to 4 years
Communication range with central unit: up to 1300 m in an open space
Two-way communication between devices: Yes
Self-adjusting RF output power: up to 20 mW
Block encryption based on AES algorithm: Yes
Detector polling period: 12−300 s
Additional temperature sensor: available
Operating temperature range: from 0°С to +65°С
Permissible humidity: up to 80%
Anti-sabotage: protection against fraud, jamming detection, tamper-resistant
Remote setting and testing: Yes
Dimensions: 132 × 132 × 31 mm
Weight: 220 g

Complete set

FireProtect detector
SmartBracket mounting panel
2 x CR2 batteries (pre-installed)
1 x backup battery CR2032 (pre-installed)
Installation set
User’s guide