LED module, linear, 280mm, 750mA CC, 11.12V, 8.3W, 4000K, AKTO

VALUE series modules fromAKTO are designed for linear general indoor lighting.

Compared to conventional LED strips, these modules offer significantly higher efficiency, lower heating and higher luminous flux.

These modules are powered by Constant Current (CC) power supplies.

Connecting the modules in parallel requires a higher stabilised current, while connecting the modules in series requires a higher voltage. PVZ:

Connecting two 560mm long modules to obtain the maximum luminous flux (1050mA):

• A power supply with 1500mA stabilised current and a voltage of 11.12Vdc will be required in parallel.

• In series, a power supply with 750mA stabilised current and 22.24Vdc voltage will be required.

The main advantages of the VALUE series of stabilised current LED modules from AKTO are:

• Extremely high efficiency up to 180.5 lm/W
  
• Compared to conventional LED strips, a much better price/lumen ratio (lm/€)
• Maximum luminous flux up to 5371 lm/m (@750mA)
• Significantly lower heating - with a stabilised current as low as 750mA, the LEDs reach temperatures below 62°C at an ambient temperature of 23°C (critical limit 85°C)
• LEDs fromSamsung
• 5 year warranty (>50,000hrs) if max TC temperature does not exceed 70°C
• Low colour temperature deviation(MacAdam step 3)
• Convenient installation and connection - using Zhaga standard for fixing points, built-in PUSH-ON contacts (monolithic wire up to 0,5 mm² recommended), convenient serial connection.
• Special orders available to suit your requirements (CRI >90, 2700K, 3000K, 3500K, 5000K, 6500K, etc.)

Stabilized current power supplies are recommended:

MeanWell models:

APC Series

Hermetic: LPC Series

TRIAC submersible: PCD Series

AC, Controlled: LCM Series

Sunricher Managed, variable current power supplies:

SRP Series

The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: [email protected].