Filament PET-G Matte Gray 1,75 mm 0,85 kg Fiberlogy
Warehouse in Europe
94%+ positive feedback
30 day money back guarantee
Product description
Matte PET-G – durability and elegance
Matte PET-G filament is a new product in the Fiberlogy offer. It’s the answer to numerous requests from 3D printing enthusiasts. This modern PET-G filament is characterized by unique, matte finish. It not only gives prints a refined look, but also effectively masks the layers, enhancing the esthetics of the final product.
Compared to matte PLA filaments, Matte PET-G offers much higher strength. As a result, it allows for creating solid and durable prints with an elegant appearance. It is perfect for designs where esthetics is as important as the strength of the filament.
Matte PET-G is easy to operate, but to fully use its potential, it requires higher printing temperatures between 250 and 270°C, especially for high-speed printing, e.g., on BambuLab printers. These are key parameters to ensure the optimal strength and excellent bonding of the layers. For best results, we recommend increasing the number of outlines and fills in the slicer settings.
3D PRINTING APPLICATIONS:
DECORATIONS: interior design elements, figurines, ornaments, vases
HOBBY: costume elements, cosplay accessories
UTILITY: toys, desk organizers, containers
GADGETS: phone stands, jewelry displays
Matte PET-G properties:
matte finish
ease to print
low susceptibility to shrinkage and stringing
resistance to acids, salts, alkaline substances
excellent hiding of the layer lines
How to print EASY PET-G?The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.
Nozzle Temperature 250-270°C
Bed Temperature 90°C
Closed chamber not required
Fan 0-25%
Flowrate 95-105%
Printing Speed < 100 mm/s
Surface masking tape
Retraction (direct) 2-3 mm
Retraction (bowden) 3-5 mm
Retraction Speed 20-45 mm/s
Drying conditions 60°C / 4h
Notes Due to the strong adhesion to the bed, it is not recommended to print directly on its surface or on glass. This can lead to damage. We recommend using a masking tape.
