PET-G CarbonLook filament (poly(ethylene terephthalate) with addition of glycol and carbon fiber) is an easy to print material, with a satin, glossy surface and barely visible layers.

Applications: prototyping, large format prints, lampshades/enclosures.

PET-G CarbonLook by ROSA3D was designed for printouts in which the visual effect of the object is more important than its industrial application. It was made from PET-G material with an admixture of carbon fibres. The result is a filament with unique visual properties. Printouts made from this filamet have a satin, glossy surface and barely visible layers.

Properties of PET-G CarbonLook are similar to other PET-G filaments available in our offer. This means easy printing, no stringing and very good interlayer adhesion. Printouts have very good detail reproduction and an unique surface. The friction of carbon fibres have been minimised to reduce friction and maximise the service life of brass nozzles.

PET-G CarbonLook will work great even with basic 3D printers. It does not require a heated bed or chamber. It is characterised by low shrinkage and lack of odour.

Recommended printing parameters

• extrusion temperature 225-250°C
  
• bed temperature: 60-80°C
  
• fan: 0-60%
• print speed: 60-80 mm/s

Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.

PRODUCT PARAMETERS

• Color: carbon black
  
• Diameter: 1.75 mm
  
• Weight: 500 g ( vacuum packed)
• Density: 1.24 g/cm3
  
• Odor: odourless
  
• Vicat softening point: 78°C
• Diameter tolerance:    +/- 0,05
  
• Oval tolerance:    +/- 0,02
  
• Tensile elongation:    5,5 %
  
• Tensile strength (to break):    45 MPa