Filament ABS+ black 1.75mm 1kg refill Rosa3D
Warehouse in Europe
94%+ positive feedback
30 day money back guarantee
Product description
ABS+ material is a widely applicable engineering plastic with moderate shrinkage (0.4-0.7%).
Excellent processing properties such as good flow, bright, vivid colours and very good layer adhesion allow a wide range of applications for this filament.
ABS+ has a high impact strength and is impact resistant.
ABS+ from ROSA3D gives an elegant semi-matte finish to the surface of prints. It can be smoothed with acetone.
APPLICATION
- Prototypes of machine parts, gadgets, exhibition models
- Parts in electronics
- Computer parts
- Toys: building blocks, car components, educational aids
HOW TO PRINT
extrusion temperature: 230-270°C , table temperature: 80-110°C
Printing in a closed chamber on a heated table is recommended. If there are problems with adhesion, we recommend using an adhesion agent. Print cooling is recommended. Its power should be adapted to the capabilities of the printer and the geometry of the model being printed.
NOTE: Printing in a well-ventilated room is recommended. Do not stay in the room for long periods of time when printing with an open chamber due to the irritating smell and fumes, which may cause dizziness or headaches in sensitive people.
TECHNICAL PARAMETERS
Diameter 1.75 mm
Diameter tolerance +/- 0,05
Oval tolerance +/- 0,02
Net weight 1000 g/ 2500 g
Print temperature 230-270 °C
Bed temperature 80-110 °C
PHYSICAL PARAMETERS
Density 1,05 g/cm3
Odor irritating
Tensile elongation 2,5 %
Tensile strength (to break) 44 MPa
Tensile modulus 2276 MPa
Thermal deformation temperature 99
