Controller SOL PWM 20A 2xUSB, LCD

Volt Polska 3IPSSOLU20 / 20A / 12-24VDC solar panel charge controller is used to control the operation of stand-alone photovoltaic systems.The device ensures the correct charging current characteristics of the battery(s), additionally protecting them from over-discharging or overcharging. SOL PWM solar panels can be used for 12V or 24V solar and battery installations.

Main features:

• Automatic input voltage recognition 12/24V
• Clear LCD display and interface controlled by 2 buttons on the housing
• Efficient 3-phase PWM (Pulse Width Modulation) load
• Battery charge level check with the possibility to reset the memory at night (applications such as street lighting)
• With protection against: overload, short circuit, overvoltage, undervoltage, overload/discharge, reverse polarity protection
• 2 USB sockets integrated

Specifications:

• System voltage: 12/24V
• Maximum solar panel voltage: 50V
• Operating current: ≤15mA
• Maximum charging current: 20A
• LVD: 10.7V 9V. 12V x 2 24V
• LVR: 12.6V / 11V...13.5V x 2 24V
• Holding voltage: 13.6V/13V..15Vx2 24V
• Overload protection: 16.5 V x 2 24 V
• Reverse polarity protection: Yes
• Charging mode: PWM
• Temperature compensation: -24 mV/C for 12 V installation; x2 24 V
• Operating temperature: -35 to +55 °C
• Wire diameter: 28-10AWG
• Dimensions: 133 x 70 x 34 mm
• Weight: 300g
• USB: 2x built-in USB port 5V/2A

The description was translated using an automatic translator. If you notice any discrepancies, please notify us by email: [email protected].