Warehouse in Europe
94%+ positive feedback
30 day money back guarantee
Product description
Access control reader Ubiquiti UniFi UA-G3-B
Specifications
Supplier product description
- Type: Access control system reader
- Model: UA-G3-B
- Color: Black
- Brand: Ubiquiti
- Connections: 1x10/100MbE RJ45
- Wireless technologies: BLE 4.1, NFC
- Power supply: PoE, 48V, 5W
- Sensors: Proximity
- NFC frequency: 13.56 MHz
- NFC reading distance: <30 mm
- Protection rating: IP55
- Operating temperature: -30...45°C
- Supported technology: Apple Touch Pass
- Usage: Outdoor
- General
- Dimensions93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
- Weight82 g (2.9 oz)
- Enclosure materialPolycarbonate, glass
- Mounting materialAluminum alloy
- MountingIn wall, gang box
- WeatherproofingIP55
- Networking interface(1) 10/100 MbE RJ45 port
- ConnectivityBLE 4.1, NFC
- Power methodPoE, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU
- Supported voltage range48V DC
- Max. power consumption5W
- ESD/EMP protectionAir: ±15kV, contact: ±8kV
- SensorsProximity sensor
- Speaker(1) 8 ohm, 0.7W
- LEDsR/G/B/W (Learn more)
- Button(1) Factory-reset
- NFC frequency13.56 MHz
- NFC read range< 30 mm
- NFC technologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340), MIFARE Classic / MIFARE DESFIRE, Sony FeliCa™ (ID only), NFC Forum tags T1T, T2T, T3T, T4T and T5T, ECP 2.0
- Operating environmentOutdoor use
- Ambient operating temperature-30 to 45° C (-22 to 113° F)
- Ambient operating humidity5 to 90% noncondensing
- Software informationThe software version of a product can be checked at https://unifi.ui.com
- UL 294 levelDestructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I
- UL 294 statementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- PoE cabling requirementsCat 5e cabling is the minimum recommended. The performance category should match the required transmission speed at the installation site. Minimal conductor gauge: 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.
- CAN/ULC-60839-11-1 GradeGrade assignment: I
- CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Supplier parameters
Category
Access cont
Brand
Ubiquiti
Supplier's product code
UBIQUAG3B
Product ID
U-4460873
Product code
UBIQUAG3B
The information that supplier provides may differ from the actual product. If you noticed an error please let us know by email: .